wetzoeker

Article 33 Protocol nopens de verkeerstekens

Prohibitory signs

1 The sign “Stop at intersection” shall be used to indicate that a driver shall stop before entering another road and shall give way to vehicles moving along that road.

2 This sign shall consist of a red triangle with the point downwards inscribed within a red circle. The triangle may have the word ”Stop” as shown in the diagram II, A. 16.

3 The diameter of this sign shall be at least 0.90 m for the sign of standard size and at least 0.60 m. for the reduced size.

4 This sign shall be placed at roads without priority, at a suitable distance from the intersection, up to 50 m in open country and up to 25 m in built-up areas.

It is recommended that there should also be placed on this road a suitable position sign, mark or line, as near to the intersection as practicable.

5 The sign II, A. 16 may be optionally preceded, in particular where no sign ”Road intersection” (I, 7) is erected, by an advance sign consisting of sign I, 22 supplemented by a rectangular plate bearing an indication of the distance from the intersection as shown in diagram I, 22a.

When there are other intersections between the advance sign and the intersection with a priority or a major road, the advance sign shall be repeated after each of these other intersections.

Regeling
Protocol nopens de verkeerstekens
Soort
Verdrag
Geldend vanaf
22-10-1964
BWB-id
BWBV0005570
Versie
1964-10-22_0

In de hele regeling · Officiële tekst op wetten.overheid.nl