wetzoeker

Article 12 Verdrag nopens een eenvormig stelsel voor de meting van zeeschepen

Unless otherwise stated in the present regulations, the measurements are to be taken to the inner edge of frames and to the top of floors or double bottom, deducting from these measurements the average thickness of continuous ceiling, if any, fitted directly on to the frames, floors or double bottom. If batten or spar ceiling is fitted on the inner edge of the frames, and the ceiling on the floors or double bottom is fitted on grounds and not laid directly on to the top of the floors or of the double bottom, the following provisions will apply.

When the ceiling on the bottom is laid on grounds and not fitted directly on the floors or double bottom, no allowance is to be made for the thickness of the grounds when measuring the depth of transverse sections. If a batten or spar ceiling (wood or steel) is fitted directly on to the inner edge of frames and the spacing between the battens or bars is not more than 1 foot or 0.305 metre, the thickness of the spar ceiling shall be deducted from the breadth measurements limited to a maximum of 0.25 foot or 0.076 metre on each side of the ship. If, however, the spacing exceeds 1 foot or 0.305 metre, the breadths must be taken to the inner edge of frames. In ships with beam brackets of ordinary size, the uppermost spacing counted from the under side of the deck beam may exceed 1 foot or 0.305 metre provided the uppermost batten is fitted close up to the beam bracket. Side stringers are counted as spar ceiling when determining the spacing of the battens or bars.

When the holds are insulated (e.g., for refrigerating purposes) and the casing extends beyond the inner edge of the frames, or above the top of the floors or double bottom, a maximum allowance of 0.25 foot or 0.08 metre may be made when measuring the horizontal breadths and depths of transverse sections, but if the projection is less than 0.25 foot or 0.076 metre, only the actual projection is to be allowed.

Regeling
Verdrag nopens een eenvormig stelsel voor de meting van zeeschepen
Soort
Verdrag
Geldend vanaf
01-02-1964
BWB-id
BWBV0005524
Versie
1964-02-01_0

In de hele regeling · Officiële tekst op wetten.overheid.nl