Annex 1 — , Appendix 4 Overeenkomst inzake het internationale vervoer van aan bederf onderhevige levensmiddelen en het gebruik van speciale vervoermiddelen bij dit vervoer (ATP)
, Appendix 4
The distinguishing marks prescribed in appendix 1, paragraph 4 to this annex shall consist of capital Latin letters in dark blue on a white ground. The height of the letters shall be at least 100 mm for the classification marks and at least 50 mm for the expiry dates. For special equipment, such as a laden vehicle with maximum mass not exceeding 3.5 t, the height of the classification marks could likewise be 50 mm and at least 25 mm for the expiry dates.
The classification and expiry marks shall at least be affixed externally on both sides in the upper corners near the front.
The marks shall be as follows:
Equipment | Distinguishing mark
Normally insulated equipment | IN
Heavily insulated equipment | IR
Class A refrigerated equipment with normal insulation | RNA
Class A refrigerated equipment with heavy insulation | RRA
Class B refrigerated equipment with heavy insulation | RRB
Class C refrigerated equipment with heavy insulation | RRC
Class D refrigerated equipment with normal insulation | RND
Class D refrigerated equipment with heavy insulation | RRD
Class A mechanically refrigerated equipment with normal insulation | FNA
Class A mechanically refrigerated equipment with heavy insulation | FRA
Class B mechanically refrigerated equipment with heavy insulation | FRB
Class C mechanically refrigerated equipment with heavy insulation | FRC
Class D mechanically refrigerated equipment with normal insulation | FND
Class D mechanically refrigerated equipment with heavy insulation | FRD
Class E mechanically refrigerated equipment with heavy insulation | FRE
Class F mechanically refrigerated equipment with heavy insulation | FRF
Class A heated equipment with normal insulation | CNA
Class A heated equipment with heavy insulation | CRA
Class B heated equipment with heavy insulation | CRB
Class C heated equipment with heavy insulation | CRC
Class D heated equipment with heavy insulation | CRD
Class A mechanically refrigerated and heated equipment with normal insulation | BNA
Class A mechanically refrigerated and heated equipment with heavy insulation | BRA
Class B mechanically refrigerated and heated equipment with heavy insulation | BRB
Class C mechanically refrigerated and heated equipment with heavy insulation | BRC
Class D mechanically refrigerated and heated equipment with heavy insulation | BRD
Class E mechanically refrigerated and heated equipment with heavy insulation | BRE
Class F mechanically refrigerated and heated equipment with heavy insulation | BRF
Class G mechanically refrigerated and heated equipment with heavy insulation | BRG
Class H mechanically refrigerated and heated equipment with heavy insulation | BRH
Class I mechanically refrigerated and heated equipment with heavy insulation | BRI
Class J mechanically refrigerated and heated equipment with heavy insulation | BRJ
Class K mechanically refrigerated and heated equipment with heavy insulation | BRK
Class L mechanically refrigerated and heated equipment with heavy insulation | BRL
If the equipment is fitted with a removable or dependent thermal appliance and if special conditions exist for the use of the thermal appliance, the distinguishing mark or marks shall be supplemented by the letter X in the following cases:
1. FOR REFRIGERATED EQUIPMENT:
Where the eutectic plates have to be placed in another chamber for freezing;
2. FOR MECHANICALLY REFRIGERATED EQUIPMENT AND MECHANICALLY REFRIGERATED AND HEATED EQUIPMENT:
2.1 Where the compressor is powered by the vehicle engine;
2.2 Where the refrigeration or refrigeration-heating unit itself or a part is removable, which would prevent its functioning.
Model:
02 | = | month (February) | ) | of expiry of the
2020 | = | year | ) | certificate
In the case of multi-compartment road equipment divided in two compartments the equipment mark shall consist in the distinguishing marks of each compartment (example: FRC-FRA) starting with the compartment located at the front or on the left side of the equipment;
In the case of other multi-compartment equipment the distinguishing mark shall be selected only for the highest ATP class, i.e. the class that permits the highest difference between inside and outside temperatures, and supplemented by the letter M (example: FRC-M).
This marking is mandatory for all equipment, which is built from 1 October 2020.
- Regeling
- Overeenkomst inzake het internationale vervoer van aan bederf onderhevige levensmiddelen en het gebruik van speciale vervoermiddelen bij dit vervoer (ATP)
- Soort
- Verdrag
- Geldend vanaf
- 25-08-2026
- BWB-id
- BWBV0004371
- Versie
- 2026-08-25_0