wetzoeker

Regulation 4 Internationaal Verdrag betreffende de meting van schepen, 1969

REGULATIONS FOR DETERMINING GROSS AND NET TONNAGES OF SHIPS

1. The net tonnage (NT) of a ship shall be determined by the following formula:

D = moulded depth amidships in metres as defined in Regulation 2(2),

d = moulded draught amidships in metres as defined in paragraph 2 of this Regulation,

N1 = number of passengers in cabins with not more than 8 berths,

N2 = number of other passengers,

N1 + N2 = total number of passengers the ship is permitted to carry as indicated in the ship's passenger certificate; when N1 + N2 is less than 13, N1 and N2 shall be taken as zero,

GT = gross tonnage of the ship as determined in accordance with the provisions of Regulation 3.

2. The moulded draught d referred to in paragraph 1 of this Regulation shall be one of the following draughts:

a. for ships to which the International Convention on Load Lines in force applies, the draught corresponding to the Summer Load Line (other than timber load lines) assigned in accordance with that Convention;

b. for passenger ships, the draught corresponding to the deepest subdivision load line assigned in accordance with the International Convention for the Safety of Life at Sea In force or other international agreement where applicable;

c. for ships to which the International Convention on Load Lines does not apply but which have been assigned a load line in compliance with national requirements, the draught corresponding to the summer load line so assigned;

d. for ships to which no load line has been assigned but the draught of which is restricted in compliance with national requirements, the maximum permitted draught;

e. for other ships, 75 per cent of the moulded depth amidships as defined in Regulation 2(2).

Regeling
Internationaal Verdrag betreffende de meting van schepen, 1969
Afkortingen
TONNAGE 1969
Soort
Verdrag
Geldend vanaf
28-02-2017
BWB-id
BWBV0003245
Versie
2017-02-28_0

In de hele regeling · Officiële tekst op wetten.overheid.nl