wetzoeker

Appendix Internationale overeenkomst voor veilige containers (CSC)

The Safety Approval Plate, conforming to the model reproduced below, shall take the form of a permanent, non-corrosive, fire-proof rectangular plate measuring not less than 200 mm by 100 mm. The words “CSC Safety Approval” of a minimum letter height of 8 mm and all other words and numbers of a minimum height of 5 mm shall be stamped into, embossed on or indicated on the surface of the Plate in any other permanent and legible way.

CSC SAFETY APPROVAL

1 ........... | [GB - L/749/2/7/75]

2 ........... | Date manufactured ..........

3 ........... | Identification No. ..........

4 ........... | MAXIMUM OPERATING GROSS MASS .... kg .... lbs | ↑

5 ........... | ALLOWABLE STACKING LOAD FOR 1.8 g ...... kg ......lbs | >= 100 mm

6 ........... | TRANSVERSE RACKING TEST FORCE ...... newtons | ↓

7 ...........

8 ...........

9 ...........

← >= 200 mm →

1. County of Approval and Approval Reference as given in the example on line 1. (The country of Approval should be indicated by means of the distinguishing sign used to indicate country of registration of motor vehicles in international road traffic).

2. Date (month and year) of manufacture.

3. Manufacturer's identification number of the container or, in the case of existing containers for which that number is unknown, the number allotted by the Administration.

4. Maximum operating gross mass (kg and lbs).

5. Allowable stacking load for 1.8 g (kg and lbs).

6. Transverse racking test force (newtons).

7. End-wall strength to be indicated on plate only if end-walls are designed to withstand a force of less or greater than 0.4 times the gravitational force by maximum permissible payload, i.e. 0.4Pg.

8. Side-wall strength to be indicated on plate only if the side-walls are designed to withstand a force of less or greater than 0.6 times the gravitational force by maximum permissible payload, i.e. 0.6Pg.

9. First maintenance examination date (month and year) for new containers and subsequent maintenance examination dates (month and year) if plate used for this purpose.

10. One door off stacking strength to be indicated on plate only if the container is approved for one door off operation. The marking shall show: ALLOWABLE STACKING LOAD ONE DOOR OFF FOR 1.8 g (... kg ... lbs). This marking shall be displayed immediately near the stacking test value (see line 5).

11. One door off racking strength to be indicated on plate only if the container is approved for one door off operation. The marking shall show: TRANSVERSE RACKING TEST FORCE ONE DOOR OFF (... newtons). This marking shall be displayed immediately near the racking test value (see line 6).

Regeling
Internationale overeenkomst voor veilige containers (CSC)
Afkortingen
CSC, CSC 1972
Soort
Verdrag
Geldend vanaf
01-07-2014
BWB-id
BWBV0003233
Versie
2014-07-01_0

In de hele regeling · Officiële tekst op wetten.overheid.nl