wetzoeker

5 Verdrag inzake conventionele strijdkrachten in Europa

PROCEDURE FOR REDUCTION BY MEANS OF STATIC DISPLAY

Such items to be reduced by means of static display shall undergo the following procedures at reduction sites:

(A) all items to be displayed that are powered by self-contained engines shall have their fuel tanks rendered incapable of holding fuel and:

(1) have their engine(s) and transmission removed and their mounts damaged so that these pieces cannot be refitted; or

(2) have their engine compartment filled with concrete or a polymer resin;

(B) all items to be displayed equipped with 75 millimetre or larger guns with permanently fixed elevation and traversing mechanisms shall have their elevation and traversing mechanisms welded so that the tube can be neither traversed nor elevated. In addition, those items to be displayed which use pinion and rack or pinion and ring mechanisms for traversing or elevating shall have three consecutive gear teeth cut offfrom the rack or ring on each side of the pinion of the gun tube;

(C) all items to be displayed which are equipped with weapon systems that do not meet the criteria set forth in subparagraph (B) of this paragraph shall have their barrel and receiver group filled with either concrete or a polymer resin, beginning at the face of the bolt/breech and ending within 100 millimetres of the muzzle.

Regeling
Verdrag inzake conventionele strijdkrachten in Europa
Afkortingen
CSE
Soort
Verdrag
Geldend vanaf
06-07-1993
BWB-id
BWBV0002009
Versie
1993-07-06_0

In de hele regeling · Officiële tekst op wetten.overheid.nl